303 Cleaner & Spot Remover - Label and Instructions
303 Cleaner & Spot Remover
303 Cleaner & Spot Remover utilizes a proprietary blend of sequester
agents, surfactants and hyper-wetting agents to lift and suspend oil, grease
and dirt to be easily wiped/rinsed away. It is extremely safe and may be
used on all water-safe fabrics and surfaces. The cleaning action increases
with warm water, agitation and a longer dwell time.
DIRECTIONS:
Normal Cleaning: Spray on 303 Cleaner & Spot Remover until
damp. Completely wipe away dirt/grime with damp cloth until clean, rinsing
out cloth as required. Allow to dry completely before use.
Heavier Cleaning:
Spray on 303 Cleaner & Spot Remover until wet. Agitate with wet, medium-soft brush or wet cloth. Let stand. Then wipe away dirt/grime as described above. Dry completely before use.
Machine Extraction:
Add 8-12 oz of 303 Cleaner & Spot Remover to 1 gallon of warm water.
Spots:
Fresh Spills: Use a clean absorbent cloth to blot up as much of the spill as possible. Adjust sprayer nozzle to appropriate size and spray 303 Cleaner & Spot remover on the stain until stain starts to diminish and blot up with clean absorbent cloth. Rinse with water to remove excess cleaner. Dry completely before use.
Spots / Stains:
Spray the spot until wet with 303 Cleaner & Spot Remover.Agitate with wet medium-soft brush or wet cloth and let stand. Then blot up the stain and excess cleaner as described above. If necessary, repeat, agitate and let stand a few minutes before wiping clean. Dry completely before use.
KEEP OUT OF REACH OF CHILDREN, STORE & USE ABOVE FREEZING
All 303 products are guaranteed when used as directed. Manufacturer's liability limited to product replacement or refund upon proof of purchase and return of unused portion.
| 
